Total Time Spent: 5.3h
July 8th: Started working!
Started working on my table clock selected ESP32 WROOM E as my microcontroller added MP1584 buck converter to keep the voltage to 3v3 added TP4056 battery charger added CH340C USB to UART Converter to flash code added USB C receptacles
Total time spent: 1.5h
July 10th: tidied up the schematic and selected some parts!
Someone at kicad discord told me to organize my schematic so I did that added a few switches for navigation decided to use a cheap tp4056 module for battery charging selected NEO-M8 GPS module to get time and location data (Maybe use it as a personal time server or gift it to crush to get her house location :)) )
Total time spent: 1.5h
July 13th: Finished the PCB!
After some works, finished the PCB up
Scrapped the idea for a GPS module
Total time spent: 1.5h
July 15th: tidying up the PCB!
I think that I don't need my pcb that big and only need 4 switches so I removed two switches
Total time spent: 0.5h aka 30 minutes
July 16th: Changing the PCB!
I thought I am just gonna use it as a CPU, GPU temp display under my monitor so I don't need any buttons or batteries :) Also started working on the case
Total time spent: 1h
July 17th: Designing the top case!
I want to have 2 0.91" oleds for displaying the infos i want
Total time spent: 0.5h
July 25th: Created a demo firmware!
Total time spent: 0.3h