July 19th-20th

Time Spent: 4 hours

Made the schematic for the keyboard and made the layout in PCB editor. Tried wiring the keyboard in the editor but messed up and have to redo it again. Going to work on the schematics of the resistors for the LED lights and finish wiring the keyboard by tommorrow.

July 21-30th

Time Spent: 5-6 hours

Finished adding everything to the pcb and finished coding the firmware for the keybord. I used QMK firmware and also managed to load it up on Vial. Will start working on the case and hopefully finish by the next day.