JULY 11 2025

09:30

I started by choosing the layout which will be a 75% layout. I decided to use the nice!nano2 as my microcontroller, which will let me make the keyboard wireless. It has 68 switches (currently) and a GPIO expender.

I had routed my board but decided to completely reroute it to make it look nicer.

15:15

I started on a case design. I am using Fusion360 and if that doesn’t work I will use Shapr3d. The walls will be 7.5mm thick and 12.5mm tall. The floor will be 3mm tall.

I am making it sandwich mounted as it seems simplest for me. I added M2 holes (still searching for screw) I added M2 heatsets.

21:39

Done with the whole thing, only the readme left.

JULY 29 2025

I am adding more designs to my case. (18:40 - 19:19) I lowk hate Onshape. I added a hackclub flag on the sidebar where the pi pico and io expander are located.

20:35 - I wrote some simple KMK firmware for the keyboard, it has 1 layer and does nuffing.