Total Time Spent = 28.2 Hours

May 25th: Designed The 3D Model in FreeCAD!

I started by taking measurements of Arduino and other parts I am going to use, and designed it so that all these would fit inside the 3D Model, and successfully made the 3D Model.

Here is the video: video_3D File.mp4

Total time spent: 6.7h

May 26th: Made the BOM File and the Wiring Diagram!

So I have made this Circuit Diagram in WOKWI, and you can also see the BOM File in CSV Format on the Main page, I have listed all the the materials I have used in that file. ( Instead of Arduino MKR Zero I am using ESP32 Note it )

Video: video_Wokwi.mp4

Total time spent: 3.4h

May 27th: Programmed the ESP32 Code and compiled!

I have successfully programmed the ESP32 code and now it has features like taking real time weather in Nashik ( Where I live), It will take weatehr from the API Key of Openweather, and also plays music , I have just put 1 Music inside it, so it will play only one. This is the Wokwi Simulation Link https://wokwi.com/projects/433443551673204737

Total time spent: 7.5h

May 28th: Programmed the Python Code, compiled & Debugged !!

I have programmed the python ocde in PyCharm Community Edition and Debugged it !! So, the resources for my Projects are ready and tomorrow i will be finally Debugging them & testing them online !!!1

Total time spent: 10.6h