Minion
Total time: 24.5 hours
May 20
Added LCSC/Digikey part numbers for all parts in the PCB
Time Spent: 3 hours
May 19
Finished CAD for case, rotary encoder cover, and button extensions.
Time Spent: 3 hours
May 18 evening
Redid all the routing and moved some placements to add the TRRS jack and fix capacitators.
Time Spent: 2 hours
May 18 morning
I worked on implementing the TRRS jack in the schematic, which I completly forgot to do at the beginning.
Time Spent: 1.5 hours
May 16
I worked on finishing the PCB! I switched the vertical usb to a horizontal one and put it on the back, and I also fixed silkscreen warnings.
Time Spent: 2 hours
May 15
I worked on finding 3d models for all the different parts in the PCB! I haven't found a model for the vertical usb but I might change it.
Time spent: 3 hours
May 14
Finished routing + added ground fill
Time Spent: 1 hours
May 13
Worked on adding footprints for my components, and also started routing!
Time Spent: 3 hours
May 12
Finished schematic today, added lipo charging circuit and esp32 screen circuit with ssd1351 ($35.00 :skull:)
Time Spent: 2 hours
May 10
Added accelerometer, cleaned up schematic so everything is neater, finished fe1.1s schematic, added usb to sd card schematic
Time Spent: 2 hours
May 9
Added usb splitter, reset button, still need to add sd card
Time Spent: 1 hours
May 8
Worked on getting buttons, esp32 finished, and rotary encoder, trying to figure out how to add trrs jack
Time Spent: 1 hours
May 5
Worked on getting basic ESP32 schematic up, took some time as it is my first advanced PCB