Homepcbfabricator
Created by
@yahia-svg
Total Hours: 3.5
7/31/2025
I got the idea for this project when I realised how simillar my 3d printer was to a CNC machine and laser engravers since they both pretty much use the same technique for movement. So I did some research and I found that this has been explored before and I found youtube videos explaining the process and how to build one so I researched for the parts online and made the BOM here are the sources I used: https://www.youtube.com/watch?v=MDz1A1XDOt8
https://www.youtube.com/watch?v=oWLCUFvgIuo
Time Elapsed: 1.5 Hrs
7/31/2025
I designed two mounts in fusion, one for the spindle motor and another for the laser engraver:
