Gallery
591 projects
Built - Verified25
Highway
@theseagulldev
theseagulldevs-ultimate-hackpad
A cool 3x3 macropad I made with an OLED and encoder. I'm going to try to use it as a controller for QLAB and maybe also as a general purpose macropad Currently being used as QLAB controller, a software that controlls SFX for live theatre
Highway
@egg.splats
EngiPad - The Construction PDA Macropad
An 8-key Hackpad modeled off the Engineer's Construction PDA from TF2! Features custom keycaps and case, RGB, OLED, and keymaps to my most used Fusion 360 commands. (also made as part of the headphone design competition :3)
Blueprint
@clem
IOX-77: An ESP32 based Devboard with 75 GPIOs available (ESP32 Core with 5 CH32V003 MCUs)
The IOX-77 is a powerful ESP32-C3 based devboard. It comes with 75 GPIOs, which is even more than the Arduino Mega while being smaller and embedding WiFi and Bluetooth capabilities. It's like a 6 core configuration with 5 cheap CH32v003 MCUs communicating with the main core, the ESP32. With this devboard, I'll never run out of IOs for all my future projects, even those requiring dozens of IOs. This board is an upgraded ESP 32 devboard, gathering the computational power of the ESP32 and the many GPIOs offered by all the CH32.
Highway
@noxaevi
Mediapad
- The MediaPad is a macropad made for the Hackclub program Hackpad. - The macroboard features multiple (8) buttons to control Youtube-based media, including functions such as going to the previous video, rewinding, pausing, skipping 5 seconds, and going to the next video. - Additionally, there is a rotary encoder to control the volume, and pressing it allows the volume to be locked to prevent accidental changes. - Similarly, a board-lock button exists to lock the keys that move to a different video, allowing only the inputs related to volume or time changing within the current video - Features an LED that could be used for debugging or other purposes if neccessary
Highway@noxaevi
The Breadboard+
The Breadboard+ is a custom RP2040 devboard in the shape of bread and fun decorations on both the front and back, making it slightly bigger than others in return for a much nicer look. This board should have nearly everything that would be needed for any IOT project, including a USBC connection, 24 GPIO pins (4 analog), and even WIFI connectivity through a secondary microcontroller on the board (the ESP-32 WROOM C3)
Blueprint@clem
AngstromIO - a devboard the size of a USB C
AngstromIO is one of the smallest devboards out there, barely longer than a USB-C connector, based on the ATtiny1616 MCU (16kB flash). It comes with 2 Addressable RGB LEDs, and 2 GPIOs as well as I2C lines are broken out. I made a dual CH340 programming board too, both for UPDI programming and debugging (one way Serial Communication). The third PCB is a cost effective, USB-C devboard based on the CH32v003 (QFN) with a small 5x4 charlieplexed LED matrix.
Hackpad
@anshuman.tripathy
Hackpad V1
- 1x Seeed XIAO RP2040 - 9x Cherry MX switches - 1x EC11 Encoder - 1x PCB - 9x Through-hole 1N4148 Diodes - 8x M3x16mm screws - 8x M3 hex nuts - 9x Keycaps
OnBoard@anshuman.tripathy
ESP32 Now based Transmitter and Receiver
Its a 10 channel ESP32 based receiver and transmitter that uses ESP-NOW protocol
Highway@noxaevi
MacroBoard
- The MacroBoard is an extension of a much smaller "macropad" featuring a full TKL layout with a rotary encoder for volume and a whopping total of 22 macro keys (10 macrokeys physically and 12 more due to the fn keys being on another layer). - Every model is split in half to allow for printing on a consumer-sized printer. - Made with blood, sweat, and tears, as I almost quit twice (check README for more about that, but one of the images give a hint of what happened)!
Highway@anshuman.tripathy
Desk-Display
This is desk display made using a 5.83 inch E Ink display paired with a ESP32. It can display anything but i want it to display Day,Date and Time along with a small todo list at the bottom
Highway@egg.splats
The Biblically Accurate Keyboard
A large keyboard in the shape of a biblically accurate angel! be not afraid :3
Blueprint
@kai.the.jolly.guy
Overglade Hackathon Badges
NFC hackathon badges for the Overglade game jam in Singapore!
Highway@kai.the.jolly.guy
CYBERPAD-01 - Cyberpunk Inspired Macropad
3 key, cyberpunk inspired macropad with backlight and a rotary encoder. I designed this as a test for myself to see if I could create something practical but really complex and pretty.
Highway@kai.the.jolly.guy
PR1SM - Stacked Acrylic Keyboard
PR1SM is a minimalic, stacked fully backlit acrylic keyboard using a small 2 layer pcb. It's made out of laser cut acrylic, so combined with the neopixels, it'll have a really cool effect.
Blueprint
@notaroomba
Cyberboard V2
A cyberpunk-themed STM32 development board featuring Bluetooth 5.1 connectivity and integrated Li-ion/LiPo battery charging support. Now with all the errors fixed from the last design and more sensors including an IMU and a barometer!
Highway
@danny
stm32pe-midi controller
I built a midi controller that is more expressive through the midi mpe protocol. It enables sending signals that can shift the pitch, make effects, and make music more unique. It is done through hall effect sensors and flexures that allow the movement of a magnet.
Highway@danny
Slider Synth
My project is a synthesizer that uses a linear sensor and force sensor as control. It has some extra features like a rotary encoder and leds. It was originally inspired by Wintergatan's modulin which is closed source and not buyable. I sought to make a complete open source design that others could use.
Highway@notaroomba
Luma
A Minecraft inspired lantern that has Bluetooth and Wifi to allow for configuration from a custom app.